Red Skull mask project

German Silesky · March 2016

Hello I want to share some of the progress of a silicone mask I'm making based on the character Red Skull, I hope you like it.

MonsterClay Sculpt

Image: http://s20.postimg.org/y1vgp00r1/Red_Skull_Final_Sculpt.jpg

Image: http://s20.postimg.org/3lpjqvf7x/redskull_skindetail.jpg

Chris Ellerby · March 2016

Beautiful work!

How do you like Monster Clay? I've been using Chavant for years but recently purchased a bunch of Monster Clay for my next sculpting project. Looking forward to trying it out.

/Chris

German Silesky · April 2016

I love it, but I started with it and have'nt tried any other medium, so I can not compare it with anything else, but I can say that I have no complaints about it. Go on and try it, and you can give me some input and compare it to chavant.

German Silesky · May 2016

ok, here's the silicone cast, just have to fix some seams and small details and it'll be ready.

Image: https://us.v-cdn.net/5020761/uploads/editor/2g/isxtzq7czzd1.jpg

Chris Ellerby · May 2016

Nice! Looks like it turned out great. Have you tried it on yet?

/Chris

German Silesky · June 2016

not yet, this saturday i'll do it and post some pics

Ash Linton · June 2016

Looks great! Is that a mosher head former?

German Silesky · June 2016

thank you! no the headform I used is a Joe Display head from CFX

German Silesky · June 2016

Here some test pics

Chris Ellerby · June 2016

Hydra would be proud!

/Chris

German Silesky · June 2016

LOL, thanks!

German Silesky · July 2016

final composition image of the full costume

Image: https://s20.postimg.org/9htmw1jnv/Red_Skull_Front_Street.jpg

Chris Ellerby · July 2016

Great work!

/Chris

German Silesky · July 2016

One final picture

Image: https://s20.postimg.org/nqkj600ct/Red_Skull_Dungeon.jpg

Rocky Balboa · October 2016

Hi, how you make the mold and place the silicone?
I'm trying to make a mask of me, but I have this doubt ...
You pouring silicone into the mold and turns to spread (rotomolding)
or is injected? (If injected), how you inject silicone in to
the mold to not make air bubbles and not leave any marks?
Thanks!

German Silesky · October 2016

Hello! sorry for the late response, I had the same dilema while pouring this one, at the end I made two, one gravity poured, and the other with the mold open I painted the silicone on both faces of the mold, then closed the mold and closed the seams.
There will be always some marks and things to fix and repair.

David Boccabella · November 2016

Brilliant work. Having see the movie and now your work I am truly impressed

German Silesky · November 2016

Thank you David, it means a lot!

William Hannay · November 2016

This is awesome! Great work

German Silesky · November 2016

Thank you!

Red Skull mask project

Comments