Things I Should Have In My Studio

A lot of that will depend on the scale and type of projects you plan on working on.

This is by no means a comprehensive list, as that would take days to write up, but hopefully, this gives you some ideas.  This is also all very generic.  If there is a specific type of effects work you want to focus on you would need a lot more detailed lists than this.

Modern tools like 3D printers (resin and FDM), laser cutters, and CNCs are all very useful and use a lot in modern effects.

To start with are the most basic aspects of a shop.  Good lighting everywhere, plenty of clean work surfaces at a comfortable height, plenty of access to power plugs and compressed air hookups, a clean and organized setup for expendables and materials, good air filtration, ventilation, and dust removal, well maintained and organized tools, and plenty of focus on health and safety.

A clean area for painting, with a spray booth/ventilation, if you can, is also ideal.  Then have a good stock of everything from primers, spray paint, acrylics, catalyzed paints, etc.

A clean area for sculpting with a good selection of tools, a toaster oven/lightbox to soften clays, and a collection of water-based and oil-based clays for different applications.

A clean area for molding and casting, stocked with all the typical supplies.  Mixing buckets, mixing sticks, mold releases, silicones, epoxies/resins, reinforcement materials like hemp/sisal/fiberglass, scrap wood for handles/supports, mold wall materials, shims, ultracal/hydrocal, dental stone, alginate, scales, degassers, pressure pot (properly rated and maintained for safety), drill mixers, stand mixers if you will be doing foam latex, a latex oven, etc.

You'll notice a "clean" trend, as cross-contamination or dust and dirt can cause a lot of problems. The last thing you need is dust from someone sanding/grinding landing on a freshly painted prop, or in your clay.  Or overspray from painting landing on pretty much anything.

If you plan to do electrical work from props, animatronics, etc, you should have an area dedicated to that with soldering irons, wire, connectors, heat shrink, benchtop power supply, good lighting, magnification, work vises to hold small parts, fan/filter for soldering fumes, etc.  The actual selection of tools here is nIf early endless.

If you'll be doing fabrication you'll also need a large collection of tools.  Basics would be a drill press, band saw, hand drills, a rotary tool like a Dremel, and all the basic hand tools.  You'll also want a large collection of adhesives, and hardware (nuts, bolts, screws, washers, springs, rivets, threaded inserts, Chicago screws, etc), and fabrication materials like aluminum (channel, flat stock, and extrusions like 80/20), steel, wood, foam, plastics, fabric.

And most importantly, safety and PPE.  Have eye protection available at every spot in the shop without having to open a drawer or take a step.  Plenty of respirators and filtration masks for sanding or working with VOCs.  Gloves that are rated for various types of chemicals.  Nitrile is a good common glove material, but for some applications, you may need another type.

At least one easy-to-find, clearly marked, first aid kit.  The same goes for fire extinguishers, though you may want more depending on the size of your shop and the type of work you are doing.  For example, a laser cutter should have a fire extinguisher within arm's reach, the same for welding stations, soldering stations, etc.

And I have to again stress that this is a very incomplete, off the top of my head, quickly put together, list.  I urge anyone else to post their ideas/suggestions here as well to help cover what was missed. 

/Chris