BioShock 2- Big Daddy- Subject Delta
Hello all,
Here is my Subject Delta Big Daddy from BioShock 2.
There's still some things needing to be complete including tightening the left arm a little bit, molding the drill to cast in foam, and creating some new belts for the thighs.
To give you guys some info-
-The full costume stands over 7' tall
-All paint, electronics, molding, casting, and finishing was done by me.
-The drill can spin and all the gears on the drill also spin (this was modeled by Lilykill)
-Almost every piece was molded and cast by me in Resin or fiberglass. The rest is either resin prints or is an FDM print that I didn't have time to mold but will soon (the drill will eventually be molded and cast in foam to conserve weight and so I can lift it properly.
-I have almost 100% full range of motion.
-I see through the camera on the top of the head connected to a monitor inside the helmet.
-All leather except some of the boot pieces is made of 100% genuine leather.
Here is my Subject Delta Big Daddy from BioShock 2.
There's still some things needing to be complete including tightening the left arm a little bit, molding the drill to cast in foam, and creating some new belts for the thighs.
To give you guys some info-
-The full costume stands over 7' tall
-All paint, electronics, molding, casting, and finishing was done by me.
-The drill can spin and all the gears on the drill also spin (this was modeled by Lilykill)
-Almost every piece was molded and cast by me in Resin or fiberglass. The rest is either resin prints or is an FDM print that I didn't have time to mold but will soon (the drill will eventually be molded and cast in foam to conserve weight and so I can lift it properly.
-I have almost 100% full range of motion.
-I see through the camera on the top of the head connected to a monitor inside the helmet.
-All leather except some of the boot pieces is made of 100% genuine leather.
Post edited by StaggzCosplay on
4
Comments
https://www.instagram.com/reel/C_RlOPEvJSj/?igsh=MTBoNWxyeWE4aXNhcw==
/Chris
- mr metal color copper
-red, blue, purple, and yellow inks
-dirty down black soot and verdigris.
-chalk antiquing gel
-U-rust blue copper and activator
- raw umber oil paint
-brass spray paint (rustoleum… yep, sounds crazy but it was the most realistic brass paint I found).