Best Of
Nosferatu - Latex mask for the films 100th anniversary
For the 100th anniversary of the “Nosferatu”, I sculpted a mask based on the classic film. With a bit of artistic freedom, so it’s not a 1:1 copy. I made the mold of the Chavant clay sculpt, and turned it into a latex mask. Even as it was my first attempt at making a latex mask, and with making a fair share of mistakes in the process, I am happy with the final result.
Sculpting Timelapse:
https://youtu.be/GV3Q4IZ-5D0
Photos:
Sculpting Timelapse:
https://youtu.be/GV3Q4IZ-5D0Photos:
The Creepy C. - latex mask sculpt
I wanted to make something in-between a realistic mask and a "mask-looking" mask 
, something that could fit into a slasher horror. So I made the "Creepy C", and I ran few copies to test out different paint jobs and variants. The basic one is the Flesh Variant, then of course I had to make a creepy Clown Variant. Last but not least, was the Revenge Variant, which I imagined as something that would appear in a "sequel" - where the Creepy C comes back from beyond the grave!
Sculpting Timelapse:
https://youtu.be/6iRhYUDJuFQ
Photos:
, something that could fit into a slasher horror. So I made the "Creepy C", and I ran few copies to test out different paint jobs and variants. The basic one is the Flesh Variant, then of course I had to make a creepy Clown Variant. Last but not least, was the Revenge Variant, which I imagined as something that would appear in a "sequel" - where the Creepy C comes back from beyond the grave!Sculpting Timelapse:
https://youtu.be/6iRhYUDJuFQPhotos:
Nosferatu wallplaque
Nosferatu wallplaque sculpted in Monster clay by myself height 13 inches width 6.5 inches
"Masters of horror" chest
Jeux d'échec grand format (1m20 sur 1m20) pièces réalisées en pâte polymère et mix media, peintures acryliques, pied en résine.
Les pions noirs, représentent les millésimes "Hammer" et les blancs représentent les "cultes".
Les petits pions sont des tirages résines de mes sculptures. (alien et petites pierres tombales).
Les pions noirs, représentent les millésimes "Hammer" et les blancs représentent les "cultes".
Les petits pions sont des tirages résines de mes sculptures. (alien et petites pierres tombales).
Art Deco Krampus Mask
I began this mask based off of a base Art Deco head design that I had seen in the Fallout video game. I thought it might be neat to try to make a Krampus mask in this style since I hadn't seen it done before.
Sculpted out of ApoxieSculpt and styrene sheets.
Infested Chestburster Xenomorph Sculpture
Infested Chestburster Sculpture! I wanted make a "sister" piece to the first Xeno I Submitted a couple years ago.
I do all my own photography, videography, editing, and soundscapes.
Painted with Createx Colors Bloodline by Tim Gore
Thank you so much for looking!
https://youtu.be/6M1grPdpEwU
I do all my own photography, videography, editing, and soundscapes.
Painted with Createx Colors Bloodline by Tim Gore
Thank you so much for looking!
https://youtu.be/6M1grPdpEwU
Re: Bat Monkey
Watched Casey Loves video and sculpted & painted this in the same day. About 10 inches tall. Super sculpey & Tim Gore Paints.
Lucifers consigliere
Super sculpey/polymer clay one of a kind bust on vintage brass base. Approx 9 inches tall. Sadly it was stolen from a gallery show but still a fave!
Teen Wolf
So I made this entire costume, including prosthetic mask, wig, jacket, trousers and shirt.
This was my first-ish attempt in prosthetics, it's all a one piece latex mask that I can glue onto my face with either telesis 5 or prosaid, and blend in the eyes and lips edges.
I started making it in 2010 and I had to stop for a couple of years (I mainly only did the actual latex piece, and that was it). They I resumed making it and finished it by 2012. Up to this day, I improve the actual costume, little by little, and I hope to make new prosthetics with some of the new techniques I learned.
PS: photos by Veronika de Haas and Carlos Adama.
This was my first-ish attempt in prosthetics, it's all a one piece latex mask that I can glue onto my face with either telesis 5 or prosaid, and blend in the eyes and lips edges.
I started making it in 2010 and I had to stop for a couple of years (I mainly only did the actual latex piece, and that was it). They I resumed making it and finished it by 2012. Up to this day, I improve the actual costume, little by little, and I hope to make new prosthetics with some of the new techniques I learned.
PS: photos by Veronika de Haas and Carlos Adama.
Lon Chaney - London After Midnight
My tribute to Lon Chaney and his character from London After Midnight.
I created all the makeup, prosthetics, and sourced the costume, and I did the application and painting.
Sculpted in NPS clay, run in deadened PlatGel10, encapsulated in super baldiez. Six appliances in total, with hair punched on the eyebrows. I also styled the wig, made the tie and cape, and put together the costume and lantern.
Modeled by Kyle.
Teeth by Chris Lyons.
I created all the makeup, prosthetics, and sourced the costume, and I did the application and painting.
Sculpted in NPS clay, run in deadened PlatGel10, encapsulated in super baldiez. Six appliances in total, with hair punched on the eyebrows. I also styled the wig, made the tie and cape, and put together the costume and lantern.
Modeled by Kyle.
Teeth by Chris Lyons.