-
Re: Dental vs. Nail acrylic
Not sure what the rules are here for posting websites but, here is where we get our dental acrylics: http://www.theengineerguy.com/SFX-MATERIALS/Dental-Acrylic-Supplies/ You will need polymer and mon… (View Post)1 -
Re: Choosing an epoxy for a glowing knife
For an amber or orange colored blade that needs to be flexible and able to be lit from within, I would go with something like PMC-746 from Smooth-On. It's a urethane rubber, about Shore A 60. You cou… (View Post)1 -
Re: Dragon Skin Help
Dragon Skin FX Pro is a decently fast (45 min cure) low durometer (Shore A 2) that I like to use. Eco-Flex 00-35 Fast is also great but, sometimes a 5 minute cure is a bit too fast. (View Post)3 -
Re: How to patch a 10 year old mask.
Silpoxy from Smooth On is your best bet. We use it to repair platinum and tin silicone. If it cuts through a thin area, you can use powermesh as a patch on the back of the mask. Just coat the mesh in… (View Post)2 -
Re: Polyfoam Painting With Latex Mask Base
Hi Todd, SC-94 blends easily with water based paints. We use Tim Gore's Bloodline and Lifeline paints because you get great life-like color right out of the bottle. You may not need to mix with the S… (View Post)1