Thank you very much for that detailed answer, Jeffrey :-)
I will try that what you mentioned.
I would love to get Hydrocal, but here in germany i have no chance to get it.
Only ultracal 30, which i have to order from a shop in the netherlands :-(…
Thank you very much Chris.
I will try that 3 part ultracal mold as you mentioned- 1 part front- 2 parts back + spout hole in the back.
I will report here about what happened xD
Very happy, that you are here for us :-)
Hey Matt :-)
When i was building a 2,4m height Alienworm out of Foam, i tried to glue some parts togehter by using latex.
These parts which werent pressed together really good while the latex dried, came off. I realized, that the hardened latex wh…
Here is the finished halfmask on a wooden board.
I call him oxidated Marrekk :-)
That project has made a lot of fun,.. and i am very happy to be able to watch the SWSCA courses which teach me a lot- how to punch hair, too (=
Thank you Sebastian :-)
The clays were Chavant NSP soft (the beige one) and medium (the green one).
I tried out both the first time in such dimensions just to look what works. I think its better for me to work with the harder clays for example the…
I decided to bring the sculpture to the end.
I changed some wrinkles, the lids and the nose and also installed self done teeth out of dental- resin.
And after doing some measurements, i decided to sculp some ears on. To hold the proporti…
i have tried to make a latex glove out of an epoxy mold a few months ago. I had to brush in layer by layer of latex.
Every single layer had to cure,.. ( i have used a hairdryer to dry the latex- layers) That was the shittiest work ive …
Hey Nathan/ Ashy,
that Mask looks very nice, well done ;-)
There is a product called psycho paint by Smooth On. It isnt the cheapest, but the less- toxiest i think.
I havent paint with that yet,…
Hey Oso :-)
I think its a matter of the materials which are used for the appliance, how good the appliance and its edges are sculpted, which glue was used, how much time the makeup artist had to apply and such things.
Here at SWSCA are some great …
Hey Ashley :-)
I searched for some pictures of your subscribed medusa.
If i would do that project, i would sculpt the whole mask over your wifes livecast, separate the snakes and doing molds of them.
Also a core mold from the mask and cast that …
Hey Tanuki :-)
You could make 4 batches with 80g a and 100g b (4 x 180g= 720g) or 320g a and 400g b and you have an overflow of about 20 grams.
I think you can live with that overflow. Its better than headache while throwing away the calculator, …
Hey Erik :-)
I would try to heat up the surface of the mold by using a hairdryer so that the monsterclay becomes soft and maybe the mold will get off easily.
If the sucktion is so great, that the mold cant come off, i would gently drill some 1-2 …
Thank you Chris [=
Edit: The Protrusion on the nose is a cutting tooth, which clamps and cuts the meat between the lower eyeteeth. It has no separated nose, but rather a sense organ like the temperature holes like a snake xD